Seco-Larm SS-040Q Mini Shock/Vibration Detector Manuals & Support

Seco-Larm SS-040Q/BR / SS-040Q/W

The Seco-Larm SS-040Q is a mini shock and vibration detector for closed circuit alarm zones. Its N.C. contact opens for a moment when a strong hit or vibration reaches the protected surface.

Contact pressure adjusts from 1 to 50 grams for glass, wood, steel, plasterboard or brick. A tamper switch is wired separately.

Buy the SS-040Q/BR / SS-040Q/W (2 options)

Identify your model

The SS-040Q is 2-3/8 x 13/16 x 5/8 in and mounts with tape. /BR is brown and /W is white.

Key specs

Contact N.C., opens on shock
Contact rating 1 A at 50 VDC
Adjustment 1 to 50 grams, 5 to 25 recommended
Factory setting About 6 grams
Tamper Built-in, separate wires
Operating temperature -40 to 167 °F

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

False alarms

  • Raise the contact pressure setting so normal vibration does not open the contact.
  • Use pulse counting on the panel zone if it has it.

Does not trip on a test hit

  • Lower the contact pressure setting.
  • Mount it flat and tight on the surface you protect.

Common questions

On walls, ceilings, windows, safes or cabinets. Mount it on the surface you want to protect.

A closed circuit (N.C.) zone.

About 6 grams. Seco-Larm recommends 5 to 25 grams.