Seco-Larm ST-1206 and ST-2406 Power Supply/Chargers Manuals & Support
Identify your model
The number after the dash is the peak current: 2AQ 1.5 A, 3AQ 2.5 A, 5AQ 4 A, 7AQ 7 A and 10AQ 9 A continuous. 3AEQ: 3AQ in an enclosure for two 4 Ah or one 7 Ah battery. The ST-1206-1.5AQ is the 6 or 12 VDC model, 1.5 A continuous.
Key specs
| Output | 6, 12 or 24 VDC, selectable |
|---|---|
| Continuous current | 1.5 A to 9 A by model |
| Input | Separate transformer, see manual |
| Battery | Built-in charger, switches over on power loss |
| Protection | Short circuit, thermal, fused charger |
| Indicators | AC and output LEDs |
Manuals and documents
Installation Manual
-
ST-2406-3AEQ Installation Manual
View PDF: ST-2406-3AEQ Installation Manual (opens in a new tab) -
ST-1206 and ST-2406 Power Supply/Charger Installation Manual
View PDF: ST-1206 and ST-2406 Power Supply/Charger Installation Manual (opens in a new tab) -
ST-2406-2AQ Installation Manual, Earlier Edition
View PDF: ST-2406-2AQ Installation Manual, Earlier Edition (opens in a new tab)
Spec Sheet
-
ST-2406-3AEQ Spec Sheet
View PDF: ST-2406-3AEQ Spec Sheet (opens in a new tab) -
ST-2406-7AQ Spec Sheet
View PDF: ST-2406-7AQ Spec Sheet (opens in a new tab)
Troubleshooting
Common questions
It depends on the model and output voltage. See the transformer table in the manual. ST-UV open-frame transformers are listed there.
Yes. It keeps a backup battery charged and switches to it when power is lost.
No. The transformer is sold separately.