Seco-Larm ST-LA108-TPQ and ST-LA115-TPQ Power Converters Manuals & Support

Seco-Larm ST-LA108-TPQ / ST-LA115-TPQ

The Seco-Larm ST-LA converters step 16 to 28 VAC or VDC down to a regulated 12 VDC output. The ST-LA108-TPQ gives 0.8 A and the ST-LA115-TPQ gives 1.5 A.

They have overload and overheat protection. Input goes to a non-polarized terminal block and the output is a 4 in pigtail with a 2.1 mm plug.

Buy the ST-LA108-TPQ / ST-LA115-TPQ (2 options)

Identify your model

Both are 1-15/16 x 1-7/16 x 15/16 in with mounting tabs and a green power LED.

Key specs

ST-LA108-TPQ 16 to 28 VAC/VDC in, 12 VDC 0.8 A out
ST-LA115-TPQ 18 to 28 VAC/VDC in, 12 VDC 1.5 A out
Output plug 2.1 mm, 4 in pigtail
Protection Overload, overheat
Input wire 16 to 22 AWG

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

No output

  • Check the input voltage is inside the range.
  • Remove the load. Overload protection shuts the output off.

Common questions

Yes. That is what these converters do.

No. The input terminal block is non-polarized.

Pick the model with more output current than the device draws: 0.8 A or 1.5 A.