Seco-Larm ST-UV Open-Frame Transformers Manuals & Support

Seco-Larm ST-UV16-W50Q / UV24-W50Q / UV16-W100Q / UVDA-W100Q / UVDA-W180Q

The Seco-Larm ST-UV open-frame transformers are UL recognized transformers with shielded windings and a 115 or 240 VAC primary. They feed ST-1206 and ST-2406 power supply/chargers.

Outputs are 16 VAC, 24 VAC, or 24 or 28 VAC selectable, from 50 VA to 180 VA. Leads are color coded.

Buy the ST-UV16-W50Q / UV24-W50Q / UV16-W100Q / UVDA-W100Q / UVDA-W180Q (5 options)

Identify your model

ST-UV16-W50Q: 16 VAC, 50 VA. ST-UV24-W50Q: 24 VAC, 50 VA. ST-UV16-W100Q: 16 VAC, 100 VA. ST-UVDA-W100Q: 24/28 VAC, 100 VA. ST-UVDA-W180Q: 24/28 VAC, 180 VA.

Key specs

Primary 115 or 240 VAC, 50/60 Hz
ST-UV16-W50Q 16 VAC, 3.0 A
ST-UV24-W50Q 24 VAC, 2.0 A
ST-UV16-W100Q 16 VAC, 6.0 A
ST-UVDA-W100Q 24 VAC 4.0 A or 28 VAC 3.0 A
ST-UVDA-W180Q 24 VAC 7.0 A or 28 VAC 6.0 A
Listing UL recognized component

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

No output

  • Check the primary leads match the line voltage, 115 or 240 VAC.
  • Check the output leads for the voltage you selected.

Common questions

Use the transformer table in the ST-2406 or open-frame transformer manual for your model and output voltage.

Yes. The primary takes 115 or 240 VAC.

Yes. It is an open-frame part and mounts inside an enclosure.