Seco-Larm ST-UV Plug-In Power Supplies Manuals & Support

Seco-Larm ST-UV05-S2.4Q / UV12-S1.0Q / S2.0Q / S5.0Q / UV24-S2.0Q

The Seco-Larm ST-UV plug-in supplies are regulated switching power supplies with a universal 100 to 240 VAC input. Each has a 4 ft cord with a 2.1 mm plug, positive center.

Outputs are 5 VDC 2.4 A, 12 VDC 1, 2 or 5 A, and 24 VDC 2 A. The plug-in models sit sideways on a power strip. The ST-UV12-S5.0Q is a tabletop supply with an AC cord.

Buy the ST-UV05-S2.4Q / UV12-S1.0Q / S2.0Q / S5.0Q / UV24-S2.0Q (5 options)

Identify your model

The model gives the voltage and current: ST-UV12-S2.0Q is 12 VDC at 2.0 A. ST-UV12-S5.0Q: tabletop with IEC320-C13 cord.

Key specs

Input 100 to 240 VAC
Outputs 5 VDC 2.4 A; 12 VDC 1.0, 2.0 or 5.0 A; 24 VDC 2.0 A
Plug 2.1 mm, positive center
Cord 4 ft
Regulation Regulated, switching

Manuals and documents

Spec Sheet

Troubleshooting

No output

  • Check the AC input and the fuse.
  • Check that the output voltage is set for the devices you power.

Device does not power up

  • Check the plug size and polarity match the device.
  • Check the device current is under the supply rating.

Common questions

Yes. The 2.1 mm plug is positive center.

Yes. The input is 100 to 240 VAC.

Add up the current of every device on the supply and pick a model with more output than that.