Security Brands Ascent C2 and C4 Cellular Access Controllers Manuals & Support

Security Brands 25-C2 / 25-C4 / 25-LT

The Security Brands Ascent C2 and C4 are cellular access controllers for gates and doors. They run on 4G LTE and are managed in the cloud through Summit Control.

The C2 runs up to 2 gates or doors and the C4 up to 4. Users open by app, text, voice or a Wiegand device on the Wiegand inputs. A 24 VDC power supply is included.

Buy the 25-C2 / 25-C4 / 25-LT (3 options)

Identify your model

25-C2: two-door controller. 25-C4: four-door controller. 25-LT: earlier one-door controller, discontinued and replaced by the 25-S1 Ascent Switch.

Key specs

Network 4G LTE, automatic network selection
Doors 2 (C2) or 4 (C4)
Users Up to 10,000 app, text and voice, by plan
Input 12 to 24 VAC/DC, 24 VDC supply included
Relays 10 A at 115 VAC / 24 VDC
Enclosure IP65 polycarbonate, -15 to 158 F

Manuals and documents

Installation Manual

Quick Start

Spec Sheet

Brochure

Troubleshooting

Unit does not respond to the app or a call

  • Check the cell signal at the unit and add the antenna extension if it is weak.
  • Check that the SIM or plan is active.
  • Check input power.

Gate does not open

  • Check the relay wiring to the operator open input.
  • Check that the user or code is set to the right relay.

Common questions

Yes. Check 4G LTE coverage at the install site before you order.

Yes. Wire it to a Wiegand input.

In Summit Control from a computer, tablet or phone.

The 25-S1 Ascent Switch.