Security Brands Edge E2 Smart Card Readers Manuals & Support

Security Brands 27-220 / 27-225

The Security Brands Edge E2 is a post mount smart card reader for gates and doors. It runs two relays and is programmed with its internal pad or the Edge app over Bluetooth.

The built-in reader uses one Wiegand channel, so one input is left for an added keypad, reader or receiver.

Buy the 27-220 / 27-225 (4 options)

Identify your model

27-220: SecurePass reader. 27-220HID: HID reader. 27-220SK: Secura Key reader. 27-225, 27-225HID and 27-225SK: the same with an intercom.

Key specs

Relays 2, for 2 gates or doors
Power 12 to 24 VAC/DC, 12 VDC supply included
Programming At the unit or by Bluetooth app
Wiegand SBI Flex 64 bit and 26 bit
Timers 7-day and 365-day per relay
Card readers SecurePass, HID or Secura Key

Manuals and documents

Installation Manual

Programming Guide

Wiring Diagram

Spec Sheet

Brochure

Other documents

Troubleshooting

Card or tag does not read

  • Check that the credential format matches the reader and panel.
  • Check power at the reader.
  • Check the Wiegand data wires D0 and D1.

Short read range

  • Check for metal behind the reader or tag.
  • Check the supply voltage under load.

Common questions

At the unit, or with the Edge Smart Keypad app over Bluetooth.

Yes. It has two relays.

Yes, a 12 VDC supply.

SecurePass cards such as the 40-C.