Sure-Fi Access Pro Wiegand and OSDP Wireless Bridge Manuals & Support

Sure-Fi SFK-DS011-ACCESS-PRO

The Sure-Fi Access Pro Kit is a wireless bridge for Wiegand and OSDP access control. The panel sees the reader as if it were wired.

It handles one Wiegand channel up to 256 bit and one OSDP device, with two pairs of relay inputs and outputs in each direction. It uses 902 to 928 MHz with AES128 encryption.

Buy the SFK-DS011-ACCESS-PRO

Identify your model

The kit has a Controller Interface for the panel and a Remote Interface for the reader. Both mount on DIN rail or a wall and run on 12 VDC.

Key specs

Radio 902 to 928 MHz, AES128
Range Up to 1 mile through obstructions
Wiegand Up to 256 bit
OSDP 1 device, RS-485
Power 12 VDC, SLA battery backup input

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

No signal at the receiver

  • Check the antenna and its connection.
  • Check the power at both units.
  • Run the range test and move the units if the signal is weak.

Common questions

Yes, one verified OSDP device. Sure-Fi says it is not compatible with Avigilon/OpenPath RS-485 OSDP.

Yes. Use the Sure-Fi app on iOS or Android.

No. Use 12 V sealed lead acid batteries.