AES i-Gate GSM and WiFi Gate Switches Manuals & Support

AES IGATE-PLUS-US / IGATE-WIFI / IGATE-WIFI-ENC

The AES i-Gate switches open gates and garage doors from a phone. The IGATE-WIFI connects to a 2.4 GHz WiFi network and runs from the i-Gate app. The IGATE-PLUS-US uses the cellular network.

Each has a relay output to the gate operator. The WiFi model runs on 8 to 36 V AC/DC and has a gate sensor input that shows open or closed in the app.

Buy the IGATE-PLUS-US / IGATE-WIFI / IGATE-WIFI-ENC (3 options)

Identify your model

IGATE-WIFI: DIN rail unit for indoor use or inside the operator. IGATE-WIFI-ENC: in an IP67 enclosure. IGATE-PLUS-US: GSM version.

Key specs

WiFi model network 2.4 GHz b/g/n
WiFi model power 8 to 36 V AC/DC
Relay N/O, N/C, COM, 3 A
Pulse time 0.3 to 4 seconds
WiFi range Up to 164 ft

Manuals and documents

Quick Start

Spec Sheet

Troubleshooting

App shows offline

  • Check the WiFi signal at the unit or the cellular signal for the PLUS model.
  • Check the supply voltage.

Relay does not trigger the gate

  • Wire the relay to the operator open input and check the pulse time.

Common questions

No. The WiFi model needs 8 to 36 V AC/DC.

Use the IGATE-WIFI-ENC with its IP67 enclosure.

Yes. The AES quick start guide covers Alexa voice control.