BEA PANTHER Wireless Push Plates Manuals & Support

BEA 10EMS / 10EMR

BEA PANTHER push plates have a wireless transmitter built into the plate, so no wire runs back to the door control. They surface mount on a wall.

The housing is IP65 for outdoor and wash-down spots. A BEA receiver at the door control picks up the signal.

Buy the 10EMS / 10EMR (10 options)

Identify your model

10EMS: 4.75 in square. 10EMR475: 4.75 in round. 10EMR61: 6 in round. Ending 1: logo and text. L: logo only. No suffix: text only. -900: 900 MHz version. No -900: 433 MHz.

Key specs

Radio 433 MHz or 900 MHz
Battery One 12 V A23
Housing IP65, stainless face
4.75 in square size 5.12 x 5.12 x 1.42 in
Temperature 14 to 131 F

Manuals and documents

Installation Manual

Wiring Diagram

Spec Sheet

Other documents

Troubleshooting

Door does not open

  • Replace the A23 battery.
  • Pair the plate to the receiver again.
  • Check that the plate and receiver use the same frequency.

Common questions

A BEA receiver on the same frequency, such as the 10RD433 for 433 MHz.

No. It runs on a battery.

Yes. The housing is IP65.