DAC Industries 11190 HES 9600 Electric Strike Kits Manuals & Support

DAC Industries 11190-S / 11190-B / 11190-BB

The DAC 11190 kit pairs an HES 9600 surface mounted electric strike with a DAC bracket. It adds electric release to a DAC panic bar gate with no welding.

The HES 9600 is field selectable for 12 or 24 VDC and fail safe or fail secure. It takes a rim exit latch with up to 3/4 in throw.

Buy the 11190-S / 11190-B / 11190-BB (3 options)

Identify your model

11190-S: silver bracket. 11190-B: black bracket, stainless strike. 11190-BB: black strike and black bracket. The bracket clamps to the latch post with U-bolts.

Key specs

Strike HES 9600 surface mount
Power 12 or 24 VDC, field selectable
Current draw 450 mA at 12 VDC, 250 mA at 24 VDC
Mode Fail safe or fail secure
Listing UL 294, UL 1034, ANSI/BHMA A156.31 Grade 1

Manuals and documents

Spec Sheet

Brochure

Troubleshooting

Strike does not release

  • Check 12 or 24 VDC at the strike.
  • Check the voltage setting matches the supply.

Latch binds

  • Adjust the bracket gap, 5/8 to 2 in on a 3 in post.

Common questions

Either. Set it in the field.

U-bolts are offered for 2, 2-1/2, 3 and 4 in posts.

No. It needs a 12 or 24 VDC supply and an access device.