D&D Technologies MagnaLatch Series 3 Pool Gate Latches Manuals & Support

D&D Technologies ML3TPKA / ML3VPKA

MagnaLatch Series 3 is a magnetic pool gate latch with a key lock. The Top Pull and Vertical Pull versions mount on posts 1 in and up.

The ideal gate gap is 3/4 in. The ML3RPK adapter fits round posts.

Buy the ML3TPKA / ML3VPKA (2 options)

Identify your model

ML3TPKA: Top Pull, release knob on top. ML3VPKA: Vertical Pull, release on the side.

Key specs

Type Magnetic latch, keyed
Posts 1 in and up
Gate gap 3/4 in
Round post adapter ML3RPK

Manuals and documents

Installation Manual

Troubleshooting

Latch does not catch

  • Check the gate gap against the latch spec.
  • Adjust the latch or keep up, down or sideways until the bolt lines up.
  • Check that the gate closer pulls the gate fully shut.

Key does not turn

  • Check that the gate is not pressing on the bolt.
  • Lube the cylinder with dry graphite, not oil.

Common questions

Top Pull mounts on top of the post. Vertical Pull mounts on the face.

Yes, with the ML3RPK adapter.

Follow your local pool code. The instructions show the latch height.