Diablo DML-9LP Free Exit Probe Detector and Kit Manuals & Support

Diablo DML-9LP / DML-9LP-100

The Diablo DML-9LP is a low power free exit detector for the Diablo Free Exit Probe. It draws about 1 mA and gives a 125 ms pulse on detect.

The probe goes in a small vertical hole instead of a saw-cut loop, so it works in gravel, dirt and pavers. The DML-9LP-100 kit includes the probe on a 100 ft lead.

Buy the DML-9LP / DML-9LP-100 (2 options)

Identify your model

DML-9LP: detector only. DML-9LP-100: detector with Free Exit Probe and 100 ft lead-in.

Key specs

Power 10 to 30 VDC or 10 to 28 VAC
Draw About 1 mA
Output Relay NO and NC, 1 A, 125 ms pulse
Fail mode Fail-secure
Temperature -35 to 165 F

Manuals and documents

Installation Manual

Spec Sheet

Other documents

Troubleshooting

No detect

  • Check the green LED: slow blink means open probe, fast blink means shorted probe.
  • Check the probe depth and the lead splice.

Gate opens with no vehicle

  • Keep the probe away from moving metal.

Common questions

No. Free exit only.

Diablo calls for a hole about 1 in wide and 18 to 24 in deep.

No. It only pulses.