Diablo DSP-11 Micro Plug-In Vehicle Detector Manuals & Support
Identify your model
The DSP-11 is 1.4 x 1.4 x 2.75 in. Pins 1 and 2: power. Pin 5: relay common, 6: NO, 10: NC. Pins 7 and 8: loop. DSP-11-117 is the 115 VAC version.
Key specs
| Power (LV) | 10 to 30 VDC or 10 to 28 VAC |
|---|---|
| Relay | NO and NC, 1 A |
| Connector | 11-pin |
| Fail mode | Fail-safe |
| Loop inductance | 20 to 2,000 µH |
| Operating temperature | -35 to 165 °F |
Manuals and documents
Installation Manual
-
DSP-11 Manual
View PDF: DSP-11 Manual (opens in a new tab)
Spec Sheet
-
DSP-11 Cut Sheet
View PDF: DSP-11 Cut Sheet (opens in a new tab)
Other documents
-
Loop Sizes and Loop Characteristics Chart
View PDF: Loop Sizes and Loop Characteristics Chart (opens in a new tab)
Troubleshooting
Common questions
A blink once a second is normal. A slow blink means an open loop and a fast blink a shorted loop.
No. It adjusts itself to the loop and lead-in.
Use the DSP-11-LV on low voltage and the DSP-11-117 on 115 VAC.