FAAC 415 Swing Gate Operator Manuals & Support

FAAC 415

The FAAC 415 is a 24 VDC electromechanical swing gate operator for residential gates up to 15 ft and 700 lb. The in-axis screw drive gives 630 lbf of thrust.

Limit switches are built in. The E024U control board gives reverse on contact and battery backup. Cables exit low so the operator can sit low on the post.

Buy the 415 (3 options)

Identify your model

10441811.5: single gate kit. 104418115.5: secondary arm kit. 104418115: operator only.

Key specs

Max gate 15 ft, 700 lb
Motor 24 VDC
Thrust 630 lbf
Stroke 15.75 in
Speed About 16 s to 90 degrees
Rating IP54, UL 325

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Operator does not run

  • Check power and the fuses.
  • Check the board display or LEDs for a fault.
  • Check that the safety inputs are not active.

Gate stops or reverses

  • Check the gate moves freely by hand.
  • Check photo eyes and edges.
  • Check the force and limit settings.

Common questions

Add the 415 secondary arm kit.

The FAAC E024U on 115 VAC.

The operator, an E024U control board, a receiver and remotes. See each listing for the exact contents.