FAAC 770 In-Ground Swing Gate Operator Manuals & Support

FAAC 770

The FAAC 770 is a 24 VDC in-ground electromechanical swing gate operator for gates up to 10 ft and 1,100 lb. The operator can be serviced without removing the gate.

It opens 110 degrees as standard and 140 or 180 degrees with kits. The E024U board gives reverse on contact and battery backup.

Identify your model

10675315: operator only. Support box, board and batteries are separate.

Key specs

Max gate 10 ft, 1,100 lb
Motor 24 VDC, 70 W
Torque 221 lbf ft
Opening 110 degrees, 140 or 180 with kits
Rating IP67, UL 325

Manuals and documents

Installation Manual

Spec Sheet

Brochure

Troubleshooting

Operator does not run

  • Check power and the fuses.
  • Check the board display or LEDs for a fault.
  • Check that the safety inputs are not active.

Gate stops or reverses

  • Check the gate moves freely by hand.
  • Check photo eyes and edges.
  • Check the force and limit settings.

Common questions

No. It sets in concrete below the hinge point.

The FAAC E024U.

Yes, with the 140 or 180 degree kits.