LiftMaster DC2000 Battery Backup Controller Manuals & Support

LiftMaster DC2000

This model is discontinued. Manuals and replacement parts for existing units are listed below.

The LiftMaster DC2000 is a backup controller for Elite SL3000 slide and CSW200 swing operators. It works beside the OmniControl board.

In Auto mode it opens the gate on power loss and holds it open. In Manual mode it is an override if the OmniControl board fails. It is discontinued.

Buy the DC2000

Identify your model

DC2000: controller only, 12-pin plug. Fits SL3000 and CSW200 except 1 HP models.

Key specs

Fits Elite SL3000 and CSW200
Modes Auto and Manual
Connection 12-pin plug, J20 input socket
Power Backup battery, not 115 VAC

Manuals and documents

Wiring Diagram

Troubleshooting

Operator does not run

  • Check power and the fuses.
  • Check the board display or LEDs for a fault.
  • Check that the safety inputs are not active.

Gate stops or reverses

  • Check the gate moves freely by hand.
  • Check photo eyes and edges.
  • Check the force and limit settings.

Common questions

No.

No. It runs from the backup battery.

LiftMaster lists none.