Linear AM-DPR Dual Proximity Reader Manuals & Support

Linear AM-DPR

This model is discontinued. Manuals and replacement parts for existing units are listed below.

The Linear AM-DPR is a close range proximity reader for Linear AM3Plus, AE1000Plus and AE2000Plus access systems. It reads cards and tags at 4 to 6 in.

It is discontinued. Linear replaced it with the NBT125-W reader.

Buy the AM-DPR

Identify your model

AM-DPR: order number ACP00961. Mullion mount with an LED that confirms access.

Key specs

Read range 4 to 6 in
Output Wiegand, up to 40 bits
Power 5 to 14 VDC
Temperature -40 to 158 F
Replacement Linear NBT125-W

Manuals and documents

Installation Manual

Troubleshooting

Card or tag does not read

  • Check that the credential format matches the reader and panel.
  • Check power at the reader.
  • Check the Wiegand data wires D0 and D1.

Short read range

  • Check for metal behind the reader or tag.
  • Check the supply voltage under load.

Common questions

The Linear NBT125-W card reader.

Linear AM3Plus, AE1000Plus and AE2000Plus.

Seal the reader to the wall with silicone.