Linear Delta-3 Transmitters Manuals & Support

Linear DT-4A

The Linear Delta-3 DT-4A is a four-button transmitter for gates, garage doors and access systems. It uses an 8-position coding switch with 256 codes.

It works with one DR4 four-channel receiver, two DR2 two-channel receivers or four single channel DR receivers. The battery lasts 12 to 18 months with normal use.

Buy the DT-4A (6 options)

Identify your model

The DT-4A has four buttons and a battery door over the coding switch. The instructions provided are printed for the DT-4B and cover the same coding steps. Other Delta-3 transmitters on this page: DT 1 button visor, DT-2A 2 button, DT3+1 4 channel, LB-1 Mini-T Ladybug and DTG safety edge transmitter.

Key specs

Channels 4
Format Delta-3, 256 codes
Coding 8-position switch; keys 3 to 8 set the code
Receivers DR4, DR2, DR or DRQ
Battery life 12 to 18 months

Manuals and documents

Installation Manual

Owner's Manual

Programming Guide

Troubleshooting

Wrong button triggers a receiver

  • On single channel receivers, keys 1 and 2 pick which transmitter button triggers it.

Weak or no operation

  • Replace the battery when the red LED glows dimly or not at all.
  • Mount receivers at least 8 ft apart.

Common questions

Set keys 3 to 8 on the transmitter to any code, and set the same keys in each receiver.

Yes. Use a DR4 receiver, two DR2 receivers or four single channel receivers.

12 to 18 months with normal use.