Linear prox.pad plus Keypad and Card Reader Manuals & Support

Linear prox.pad plus

The Linear prox.pad plus is a single door access system with a proximity reader and keypad in one unit. It has two relays and inputs for request to exit and door position.

It works on its own or with Hub Manager Professional software over RS-485 or a TCP/IP module. Card and code together give higher security.

Buy the prox.pad plus

Identify your model

prox.pad plus: mounts on a single gang box or a flat surface.

Key specs

Credentials Proximity card and keypad code
Relays 2
Inputs REX and door position
Software Hub Manager Professional
Network RS-485 or SEG-1 TCP/IP

Manuals and documents

Installation Manual

Troubleshooting

Valid code does not open

  • Check that the code is set to the relay you wired.
  • Check power at the keypad.
  • Check the relay wiring to the operator open input.

Keypad does not light

  • Check the power supply and fuse.
  • Check the cable between keypad and controller.

Common questions

Yes. It can be programmed at the keypad.

Yes.

RS-485, or LAN with the SEG-1 TCP/IP module.