Locinox 3DM 3-Way Adjustable Ornamental Hinges Manuals & Support

Locinox 3DM-VP100-P50

The Locinox 3DM-VP100-P50 is a 180 degree ornamental gate hinge for metal and aluminum swing gates. It fits a 4 in square post and a 1-1/2 to 2 in gate frame.

It adjusts in width, height and depth after install and bolts on with Quick-Fix. It comes as a set of 2.

Buy the 3DM-VP100-P50 (2 options)

Identify your model

3DM-VP100-P50-HDG: hot-dip galvanized hinge arm. 3DM-VP100-P50-A2: stainless steel hinge arm. Both are reversible for left or right hand gates.

Key specs

Post 4 in (100 mm) square
Gate frame 1-1/2 to 2 in
Opening 180 degrees
Adjust 5/8 in width, 3/8 in height, 5/8 in depth
Pack Set of 2

Manuals and documents

Installation Manual

Troubleshooting

Gate sags or drags

  • Tighten the hinge bolts.
  • Use the height and depth adjustments to level the gate.

Gate binds when it swings

  • Check that the top and bottom hinges are in line.
  • Set the gap between gate and post to the minimum in the spec sheet.

Common questions

No. Add a Locinox closer if the gate must close on its own.

HDG is hot-dip galvanized steel. A2 is stainless steel.

Two hinges.