Locinox DRILLFIX Drilling Jig for Surface Locks and Keeps Manuals & Support

Locinox DRILLFIX

The Locinox DRILLFIX is a drilling jig for Locinox surface mounted locks and keeps. It self-centers on round, square or rectangular profiles from 1-1/4 to 3 in.

Clamp it on the frame or post to drill the 4-hole lock pattern or the 2 keep holes square to the profile.

Buy the DRILLFIX

Identify your model

Comes in a carry case with 9.5, 15 and 18 mm drill bits, an LA Locitool, an Allen key and a positioning pin.

Key specs

Profiles 1-1/4 to 3 in (30 to 76 mm)
Shapes Round, square, rectangular
Bits 9.5, 15 and 18 mm
Use Locinox surface locks and keeps

Manuals and documents

Spec Sheet

Troubleshooting

Holes do not line up with the lock

  • Check the jig is clamped square and centered.
  • Use the positioning pin before drilling.

Common questions

Round, square or rectangular, 1-1/4 to 3 in.

Locinox surface mounted (bolt-on) locks and their keeps.

Yes. 9.5, 15 and 18 mm bits come in the case.