Identify your model
The CPT210 kit includes the edge extrusion, color-coded end plugs and the ME210-C7 mounting channel. The plug color shows the monitoring type.
Key specs
| Profile | 1 in |
|---|---|
| Length | Cut to length on site |
| Monitoring | Set with color-coded end plugs, monitored or non-monitored |
| Technology | Conductive polymer |
| Approvals | UL 325 recognized, CE |
Manuals and documents
Installation Manual
-
CPT210 Installation Instructions
View PDF: CPT210 Installation Instructions (opens in a new tab)
Spec Sheet
-
CPT210 Sell Sheet
View PDF: CPT210 Sell Sheet (opens in a new tab)
Troubleshooting
Common questions
Yes. Cut the extrusion on site and seal it with the end plugs.
Use the color-coded end plug for the type the operator needs.
Disconnect it and read it with an ohmmeter. A 10K edge reads about 10,000 ohms at rest and drops near zero when pressed. A 2-wire normally open edge reads open at rest and near zero when pressed.