Identify your model
The 7251 mounts on a post and the 7351 on a pad. Older 7200ETL and 7300ETL units use earlier manuals listed below.
Key specs
| Max gate | 800 lb / 25 ft |
|---|---|
| Speed | 1 ft per second |
| Input | 12 to 30 VDC |
| Operating voltage | 12 VDC |
| Standby current | 10 mA |
| Chain | #40 roller chain, 35 ft |
| Control board | 1050 with OXI/A receiver |
| Enclosure | NEMA 3R |
| Operating temperature | -40 to 150 °F |
Manuals and documents
Installation Manual
-
7251 and 7351 Installation and Programming Manual
View PDF: 7251 and 7351 Installation and Programming Manual (opens in a new tab) -
7251 and 7351 Operator Manual
View PDF: 7251 and 7351 Operator Manual (opens in a new tab) -
7200ETL Installation Manual, 2009
View PDF: 7200ETL Installation Manual, 2009 (opens in a new tab) -
72001K Manual, 2014 Edition
View PDF: 72001K Manual, 2014 Edition (opens in a new tab) -
73001K Manual, 2014 Edition
View PDF: 73001K Manual, 2014 Edition (opens in a new tab)
Spec Sheet
-
7251 and 7351 Cut Sheet
View PDF: 7251 and 7351 Cut Sheet (opens in a new tab) -
7251 and 7351 Spec Sheet
View PDF: 7251 and 7351 Spec Sheet (opens in a new tab) -
7300ETL Spec Sheet
View PDF: 7300ETL Spec Sheet (opens in a new tab)
Troubleshooting
Common questions
The 7251 mounts on a post and the 7351 mounts on a concrete pad. Both handle 25 ft and 800 lb gates.
For UL 325 7th Edition, at least one monitored external entrapment sensor for swing operators and two for slide operators. Nice BlueBUS photo eyes connect with two wires.
Nice Era One and Inti rolling-code remotes through the OXI receiver. The 1050 board supports up to 1,000 remotes.