Seco-Larm SD-996C Universal Door Strikes Manuals & Support

Seco-Larm SD-996C-NUQ / NUHQ / NUVQ

The Seco-Larm SD-996C-NUQ is a universal electric door strike for cylindrical locks in wood, aluminum or metal frames. It comes with three faceplates and is only 1-1/4 in deep.

It runs on 12 or 24 VDC, is field selectable fail-safe or fail-secure, non-handed and UL 294 and UL 1034 listed. The NUHQ adds horizontal adjustment and the NUVQ adds vertical adjustment.

Buy the SD-996C-NUQ / NUHQ / NUVQ

Identify your model

SD-996C-NUQ: standard. SD-996C-NUHQ: low profile with horizontal adjustment. SD-996C-NUVQ: vertical adjustment. Lip extensions SD-995C-LE25 and LE50 add 1 or 2 in.

Key specs

Operating voltage 12 or 24 VDC
Current draw 280 mA at 12 VDC, 140 mA at 24 VDC
Mode Fail-safe or fail-secure, field selectable
Depth 1-1/4 in
Faceplates 3 included
Static strength 1,000 lb (manual)
Endurance 250,000 cycles
Listings UL 294, UL 1034

Manuals and documents

Installation Manual

Wiring Diagram

Spec Sheet

Troubleshooting

Strike does not release

  • Check the wiring connector on the strike and confirm 12 or 24 VDC at the strike.
  • Measure voltage at the strike while it is energized. Low voltage means the wire is too small or the power supply is too small.
  • Check the keypad, exit button or controller that triggers the strike.

Door does not open when the strike releases

  • Check that the latch moves freely. Move the strike or add shims so the latch is not bound.

Strike buzzes

  • Run the strike on a DC power supply, not AC.

Common questions

Yes. It is only 1-1/4 in deep and includes a faceplate for aluminum frames.

No. It is reversible for left or right hand doors.

It is field selectable on the strike. See the manual for the steps.