Seco-Larm SK-2612 Outdoor Keypads with Prox Reader Manuals & Support

Seco-Larm SK-2612-SDQ / SK-2612-SPQ

The Seco-Larm SK-2612 is an outdoor mullion-size keypad with a 125 kHz EM prox reader. It holds 1,000 users and works stand-alone or as a 26 to 44 bit Wiegand reader.

It has a Form C relay rated 2 A at 12 VDC, a built-in tamper alarm, door-forced and door-propped alarms and a 2-door interlock. The epoxy-filled housing is IP66.

Buy the SK-2612-SDQ / SK-2612-SPQ (2 options)

Identify your model

Both models are black, 1-15/16 x 4-3/4 x 15/16 in, with a backlit keypad. Users can be copied to a second unit and cards added in bulk.

Key specs

Users 1,000: 987 common, 1 super, 2 duress, 10 visitor
Operating voltage 12 to 18 VDC
Current draw 60 mA standby, 150 mA max at 12 VDC
Relay Form C, 2 A at 12 VDC
Output time 1 to 99 seconds or toggle
Wiegand 26 to 44 bit in and out
Card type EM 125 kHz
IP rating IP66
Operating temperature -40 to 140 °F

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Lock does not release on a good code

  • Check that the lock wire is on the correct relay terminal: N.O. for fail-secure, N.C. for fail-safe.
  • Install the diode across a DC lock or a varistor across an AC lock, unless the lock has its own protection.

Keypad is dead

  • Check the supply voltage at the power leads.

Common questions

Yes. Set it as a Wiegand reader with 26 to 44 bit output.

125 kHz EM prox credentials, such as PR-K1S1-A cards and PR-K1K1-AQ key fobs. They are sold separately.

Yes. Change the factory master code during setup and record the new one.