Seco-Larm SK-B141-PQ Bluetooth Keypad with Prox Manuals & Support

Seco-Larm SK-B141-PQ

The Seco-Larm SK-B141-PQ is a Bluetooth access controller with a 125 kHz EM prox reader and keypad in a single-gang IP65 zinc alloy housing. Users open the door with a code, a card or the SL Access app.

It runs on 9 to 25 VDC and holds 1,000 users. The Form C relay is rated 2 A at 30 VDC. Users and settings stay on the device, with no cloud account or internet connection.

Buy the SK-B141-PQ

Identify your model

The SK-B141-PQ is 3-1/8 x 4-13/16 x 7/8 in. It fits a single-gang box. The mullion version is the SK-B241-PQ.

Key specs

Access Code, 125 kHz EM card, Bluetooth phone app
Users 1,000
Operating voltage 9 to 25 VDC
Relay Form C, 2 A at 30 VDC
Relock time 1 to 1,800 seconds, toggle, hold open or locked
Inputs Egress N.O., door sensor N.C.
Encryption AES 128
IP rating IP65

Manuals and documents

Installation Manual

Programming Guide

Quick Start

Spec Sheet

Brochure

Other documents

Troubleshooting

Lock does not release on a good code

  • Check that the lock wire is on the correct relay terminal: N.O. for fail-secure, N.C. for fail-safe.
  • Install the diode across a DC lock or a varistor across an AC lock, unless the lock has its own protection.

App shows Searching

  • Turn on Bluetooth on the phone and move closer.
  • Close and restart the app.

Cannot log in to the app

  • Check the username spelling and case, with no space at the end, and the user code.

Auto unlock does not work

  • The app must be open and the phone screen on while you approach.

Common questions

No. Users and settings are stored on the device and managed in the SL Access app over Bluetooth.

Permanent, scheduled, temporary and limited number of uses.

125 kHz EM prox credentials, such as PR-K1S1-A cards and PR-K1K1-AQ key fobs. They are sold separately.