Seco-Larm SM-4201 Series Track-Mount Overhead Door Contacts Manuals & Support
Identify your model
SM-4201-LQ: SPST, 2 wires. SM-4201-L3Q: SPDT, 3 wires. SM-4201-L6Q: DPDT, 6 wires. SM-8201-LWQ: wide L-bracket for wide door channels.
Key specs
| Mount | Overhead door track |
|---|---|
| Gap | 3 in |
| Door channel width | 2 to 2-1/2 in; LWQ for wider channels |
| Contacts | L3Q: SPDT; L6Q: DPDT |
| Leads | 36 in armored |
| Housing | Aluminum, IP65 |
| Magnet | Ferrite |
| Contact rating | 1.0 A at 10 VDC, 10 W max |
| Switch life | 50 million cycles at 0.1 mA, 5 VDC |
| Operating temperature | -15 to 160 °F |
Manuals and documents
Installation Manual
-
SM-4201 Series Installation Manual
View PDF: SM-4201 Series Installation Manual (opens in a new tab) -
SM-4201-L6Q Installation Manual
View PDF: SM-4201-L6Q Installation Manual (opens in a new tab) -
SM-4201-LWQ Installation Manual
View PDF: SM-4201-LWQ Installation Manual (opens in a new tab)
Spec Sheet
-
SM-4201 Series Spec Sheet
View PDF: SM-4201 Series Spec Sheet (opens in a new tab) -
SM-4201-L6Q Spec Sheet
View PDF: SM-4201-L6Q Spec Sheet (opens in a new tab) -
SM-4201-LWQ Spec Sheet
View PDF: SM-4201-LWQ Spec Sheet (opens in a new tab)
Troubleshooting
Common questions
The L3Q and L6Q have NO, NC and COM wires, so they work on either. The LQ and LWQ are closed loop.
Install the switch and magnet on the protected side of the door or window so they cannot be reached from outside.
Use the L3Q for one open/closed loop, the L6Q to feed two systems, and the LWQ for door channels wider than 2-1/2 in.