Seco-Larm SM-431-TQ Screw-Terminal Surface Contact Manuals & Support

Seco-Larm SM-431-TQ

The Seco-Larm SM-431-TQ is a miniature screw-terminal surface-mount magnetic contact for alarm and access systems.

It has gold-plated screw terminals, a 1 in gap and a rare-earth magnet. It mounts with screws through the side tabs, or the tabs break off for tape mounting. White (SM-431-TQ/W) or brown (SM-431-TQ/B).

Buy the SM-431-TQ (2 options)

Identify your model

Each part is 2 x 3/8 x 1/4 in with removable mounting tabs and screw terminals on top. Tape to cover the terminals is included.

Key specs

Mount Surface, screw tabs or tape
Gap 1 in
Loop Closed loop, N.O. reed
Connections Gold-plated screw terminals
Magnet Rare-earth neodymium
Size 2 x 3/8 x 1/4 in
Contact rating 1.0 A at 10 VDC, 10 W max
Switch life 50 million cycles at 0.1 mA, 5 VDC
Operating temperature -15 to 160 °F

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Zone shows open with the door closed

  • Close the door and check the gap between switch and magnet. It must be inside the rated gap.
  • Line up the magnet with the switch. Use the included spacers if the parts sit at different heights.
  • Steel doors and frames weaken the magnet. Keep the gap smaller on steel or use a contact rated for steel doors.

Zone does not trip when the door opens

  • Set the panel zone for a closed loop (N.C.) device.
  • Check for a second magnet or other steel hardware near the switch.

False alarms

  • Check the wire connections and look for nicked leads.
  • A loose door that moves in the wind can open the loop. Use a wider gap contact on loose doors.

Common questions

Closed loop. The reed switch is closed when the magnet is next to it and opens when the door or window opens.

Install the switch and magnet on the protected side of the door or window so they cannot be reached from outside.

Yes. Break off the side tabs and use the included double-sided tape.