Security Brands Edge E1 Smart Keypads Manuals & Support

Security Brands 27-210 / 27-215

The Security Brands Edge E1 is a post mount smart keypad for gates and doors. It runs two relays and is programmed at the keypad or from the Edge app over Bluetooth.

Codes can be 4 to 11 digits and can be limited by uses or schedule. Two Wiegand inputs take an added reader, keypad or receiver.

Buy the 27-210 / 27-215 (2 options)

Identify your model

27-210: Edge E1 keypad. 27-215: Edge E1 with intercom. SecurePass 40-C cards work with readers added to the Wiegand inputs.

Key specs

Relays 2, for 2 gates or doors
Power 12 to 24 VAC/DC, 12 VDC supply included
Programming At the unit or by Bluetooth app
Wiegand SBI Flex 64 bit and 26 bit
Timers 7-day and 365-day per relay
Codes 4 to 11 digits

Manuals and documents

Installation Manual

Programming Guide

Wiring Diagram

Spec Sheet

Brochure

Other documents

Troubleshooting

Valid code does not open

  • Check that the code is set to the relay you wired.
  • Check power at the keypad.
  • Check the relay wiring to the operator open input.

Keypad does not light

  • Check the power supply and fuse.
  • Check the cable between keypad and controller.

Common questions

At the unit, or with the Edge Smart Keypad app over Bluetooth.

Yes. It has two relays.

Yes, a 12 VDC supply.

The 27-215.