Security Brands RemotePro CR 23-100 Card Readers Manuals & Support

Security Brands 23-100 / 23-100KP / 23-100I

The Security Brands RemotePro CR 23-100 is a post mount proximity card reader with 26 bit Wiegand output. It adds a card entry point to an Ascent, Edge or other Wiegand controller.

The reader sends card data to the controller and the controller runs the gate. It is powered at 9 to 12 VDC from the controller.

Buy the 23-100 / 23-100KP / 23-100I (3 options)

Identify your model

23-100: card reader. 23-100KP: card reader with backlit keypad. 23-100I: card reader with intercom. 23-206: earlier PROX 2000 II reader.

Key specs

Output 26 bit Wiegand
Power 9 to 12 VDC from the controller
Cards SecurePass 40-C cards or 40-F fobs
Feedback Tone and LED
Mount Pedestal, sold separately

Manuals and documents

Installation Manual

Wiring Diagram

Spec Sheet

Troubleshooting

Card or tag does not read

  • Check that the credential format matches the reader and panel.
  • Check power at the reader.
  • Check the Wiegand data wires D0 and D1.

Short read range

  • Check for metal behind the reader or tag.
  • Check the supply voltage under load.

Common questions

No. It needs a 26 bit Wiegand controller.

SecurePass 40-C cards and 40-F fobs.

Six wires to the controller.