Viking X-390 Swing Gate Operator Manuals & Support

Viking X-390

The Viking X-390 is a swing gate operator for gates up to 14 ft and 600 lb. It is sold as a single leaf (VA-X390SLK) or dual leaf (VA-X390DLK) kit.

It has mechanical limit switches, a positive stop system, an integrated heater, smart battery backup, solar support, a diagnostics display and lightning protection. A separate control unit holds the board.

Buy the X-390 (2 options)

Identify your model

The X-390 operator mounts at the gate and wires to a standard or optional big box control unit (ECU). Motor cable must be shielded with a drain wire.

Key specs

Max gate 600 lb / 14 ft per leaf
Kits VA-X390SLK single, VA-X390DLK dual
Limits Mechanical limit switches
Battery Smart battery backup included
Power 115 VAC or 230 VAC, or solar
Motor cable 16 AWG to 40 ft, 14 AWG to 60 ft, 12 AWG to 80 ft, 10 AWG to 120 ft

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Start with the LCD error message and the status LEDs on the control board. The manual lists a TS Ref number for each.

No power

  • Check that supply to the EMI board is about 115 VAC or 230 VAC.
  • Check the EMI fuse and that the voltage selector matches 115 VAC or 230 VAC.
  • Check the main breaker and the AC POWER switch.

Motor faults

  • Do a soft reset by pressing both limit switches at the same time.
  • Check the motor harness wiring and the motor fuse on the board.
  • Use the right motor cable gauge for the run length.

Common questions

Up to 14 ft and 600 lb per leaf.

Shielded cable with a drain wire: 16 AWG up to 40 ft, 14 AWG up to 60 ft, 12 AWG up to 80 ft and 10 AWG up to 120 ft.

Yes. Smart battery backup is included, and it can run on solar.