Lector RFID SPX-7200 de puerta/portón supervisado Exten Ethernet

• Ethernet 10 Base-T/100 Base-TX
• Totalmente supervisado

Interfaz del lector

• Wiegand, banda magnética, especial

Mecánico

• Carcasa de aluminio extruido
• Conectores extraíbles
• Se requieren de 8 a 16 VCC

• Part Numbers: SPX-7200 (816684003066): Ethernet reader-extender, paired central and remote units; SPX-7200C (816684005503): central unit only; SPX-7200R (816684001673): remote unit only; EXP-2000 (816684003233): optional expansion module set to connect an additional reader
• SPX-7200 Enclosure: 4.45 x 3.08 x 2.0 in; 0.445 lb
• EXP-2000 Enclosure: 4.45 x 3.08 x 2.0 in
• Storage Temperature: -40 to 212°F (-40 to 100°C)
• Operating Temperature: -22 to 140°F (-30 to 60°C)
• Central and Remote Supply Voltage: 8 - 16 VDC, current 300 mA
• Relay Max Switching: 220 VDC 30 W (resistive) 1 A / 250 VAC 37.5 VA 1 A
• Relay Running Spec with Load: 30 VDC 1 A (resistive) / 125 VAC 0.3 A (resistive), 1 x 10^5 operations @ 20°C
• Data Interface: Wiegand (maximum 248 bits, pass through), strobed (clock and data), F/2F (unsupervised); LED 0 - 30 V
• Network Interface: RJ45 Ethernet 10Base-T or 100Base-TX (auto-sensing)
• Network Compatibility: Ethernet: Version 2.0/IEEE 802.3 (electrical), Ethernet II frame type
• Protocols Supported: TCP/IP, ARP, UDP/IP, ICMP, DHCP, BOOTP, TFTP, Auto IP, HTTP, SMTP; standard use cases use TCP/IP
• Network Range: As extensive as the network (maximum of 328 ft between central or remote and switch/hub/router)
• Crossover Cable Range: 328 ft between central and remote
• Features: Complete solution with central (controller) and remote (reader/gate/door) interface; quiet bandwidth and power; field-configurable network settings; on-board relays to control door/gate; auxiliary I/O for LED signal and door/gate/panel status signal; status LED and supervision relay (default off) monitor network connection status
• Capacity: One reader per SPX-7200; up to 8 Wiegand readers total with EXP-2000 expansion pairs (one pair per additional reader)

Enclosure Dimensions

• Enclosure: 4.5 in L x 3.28 in W x 2.02 in H; 0.33 in mounting flange
• Mounting: Slotted holes, ø0.39 in, 3.9 x 1.48 in hole spacing

Manual del SPX-7200

Guía de inicio rápido del SPX-7200

Reader extender pair that carries the reader and door or gate signals between the entry and a distant access control panel.

• Remote gates and long driveways
• Parking lot and garage entries
• Campus buildings and outbuildings
• Sites with existing network or fiber
• Barrier arm lanes far from the panel