Part of the EZ Parts Finder: pick a part on the diagram or use the list below.
This is the interactive parts diagram for the HySecurity SlideSmart HD30 slide gate operator. Tap or click a marked part to see what it is and its part number. You can also use the list below the diagram. The views move from the main chassis to two control area photos, then the drive area, the top of the drive and the back of the unit with the idler.
Identify your model
The SlideSmart HD30 is the larger of the two SlideSmart HD models. It is rated for 3,000 lb gates with 500 lb of pull force and a 1 hp motor. The HD25 is rated for 2,500 lb with 450 lb of pull and a 1/2 hp motor. Both run on 24VDC and take 115V or 208-230V input.
Operator and manuals
- Operator: Hysecurity SlideSmart HD 30 Slide Gate Operator
- SlideSmart DC HD cutsheet (PDF)
- Heater kit installation (MX4502) (PDF)
Most ordered parts
- HySecurity MX4018 2-Channel Edge Sensor Module - HY-2NC (MX4018)
- HySecurity MX3037-0 Board, Smart DC Controller (MX3037-0)
- MX001403 Pulley, Motor, 24T, 9 mm (MX001403)
- MX002798 Transformer, 115/208/230VAC (MX002798)
- MX001766 Board, Power Supply, 115/230VAC (MX001766)
- MX002008 Battery Kit, 8Ah, Replacement (MX002008)
- MX002076 Pulley, Gearbox, 60T (MX002076)
- HySecurity MX001761 Switch, On/Off (MX001761)
Parts list by assembly
Main
| Part number | Part |
|---|---|
| MX002008 | MX002008 Battery Kit, 8Ah, Replacement |
| MX002124 | HySecurity MX002124 Reset Switch, Internal |
Control Area
| Part number | Part |
|---|---|
| MX001761 | HySecurity MX001761 Switch, On/Off |
| MX3037-0 | HySecurity MX3037-0 Board, Smart DC Controller |
| MX3796 | MX3796 Circuit Breaker, 5A |
| MX4018 | HySecurity MX4018 2-Channel Edge Sensor Module - HY-2NC |
| MX001766 | MX001766 Board, Power Supply, 115/230VAC |
Drive Area
| Part number | Part |
|---|---|
| MX002573 | HySecurity MX002573 Motor with sensor, 24VDC, 750W |
| MX002210 | HySecurity MX002210 Gearbox, SlideSmart |
| MX002798 | MX002798 Transformer, 115/208/230VAC |
Drive Top
| Part number | Part |
|---|---|
| MX002076 | MX002076 Pulley, Gearbox, 60T |
| MX001403 | MX001403 Pulley, Motor, 24T, 9 mm |
Back
| Part number | Part |
|---|---|
| MX4369 | Hysecurity MX4369 Gearbox output shaft sprocket |
| MX4847 | Hysecurity MX4847 Idler assembly, SlideSmart HD |
Common questions
How heavy a gate can the SlideSmart HD30 run?
HySecurity rates the HD30 for gates up to 3,000 lb and 50 ft long, with 500 lb of pull force.
How far will it run on battery power?
With the standard two 8Ah batteries, HySecurity lists up to 4,000 ft of gate travel after AC power loss. The optional two 50Ah batteries extend that to up to 25,000 ft.