Part of the EZ Parts Finder: pick a part on the diagram or use the list below.
Parts for the three phase Linear HSLG slide gate operator are mapped on the interactive diagram below. Choose a part on the photo for its number, or go to the parts list. The diagram has layers for the pulleys and motor, brake, control box with its transformer, clutch, limit box and output shaft. Three phase HSLG motors are sized by horsepower.
Identify your model
Three phase HSLG operators run at 208, 230 or 460 V, in 1/2, 3/4 and 1 HP, and use the three phase controller parts. Single phase units are 115, 208 or 230 V and carry a dust cover that three phase units do not. The wiring print on the label inside the cover shows which version you have. Have the model and serial number ready when you order.
Related models: Linear HSLG Single Phase
Operator and manuals
- Operator: Linear OSCO HSLG-123 1HP Slide Gate Operator
- HSLG installation manual (PDF)
- HSLG spec sheet (PDF)
- HSLG electrical drawing (PDF)
Most ordered parts
- Linear 2100-564 Clutch Facing (2100-564)
- Linear 2200-030 Limit Nut (2200-030)
- Linear 620-101293 Apex II (620-101293)
- Linear 2200-306 Chain Tension Spring (2200-306)
- Linear 2500-764 Limit Switch (2500-764)
- Linear 2200-215 Precision Bearing (2200-215)
- Linear OSCO 2500-1980 AC 3Phase Motor Board (2500-1980)
- Linear 2500-867 Alarm Kit - Pre-Apex (2500-867)
Parts list by assembly
Main
| Part number | Part |
|---|---|
| 2100-910 | Linear 2100-910 Lever Disconnect Locking HSLG |
| 2500-867 | Linear 2500-867 Alarm Kit - Pre-Apex |
| 2510-248 | Linear 2510-248 Stop/Reset Button and Bracket Assembly |
| 2200-008 | Linear 2200-008 Sprocket, 48-B-10, 1/2" Bore |
| 2200-291 | Linear 2200-291 Shifter and Locking Lever Spring |
Pulley
| Part number | Part |
|---|---|
| 2200-309-UPS | Linear 2200-309-UPS PULLEY 7 DOUBLE 5/8B |
| 2200-207-UPS | Linear 2200-207-UPS PULLEY 2 DBL 5/8B HSLG ***Discontinued - Replaced by 2200-1012 Single Steel Pulley*** |
| 2200-938 | Linear 2200-938 V BELT 28 4L STYLE COGGED |
| 2110-240 | Linear 2110-240 SHAFT INTERMED ASSY HSLG UPS |
| 2500-2313-UPS | Linear 2500-2313-UPS MTR-L 1/2H 230/460-3 W/HAR UPS |
| 2500-2314 | Linear 2500-2314 MTR-L 3/4H 3P ODP R/CF 230/460 |
| 2500-2315-UPS | Linear 2500-2315-UPS MTR-L 1H 230/460-3 W/Har Ups |
Brake
| Part number | Part |
|---|---|
| 2100-765 | Linear 2100-765-PLT Pulley Shaft |
| 2200-215 | Linear 2200-215 Precision Bearing |
| 2200-233-UPS | Linear 2200-233-UPS COLLAR SET 5/8 |
| 2100-547-UPS | Linear 2100-547-UPS BRAKE DISK KEYED HSLG JH |
| 2200-939 | Linear 2200-939 Locking Handle Spring |
| 2510-398 | Linear 2510-398 BRAKE ASSY 115V HSLG |
| 2510-399 | Linear 2510-399 BRAKE ASSY 230V HSLG |
| 2510-400 | Linear 2510-400 BRAKE ASSY 460V HSLG |
Control Box
| Part number | Part |
|---|---|
| 620-101293 | Linear 620-101293 Apex II |
| 2500-2084 | Linear 2500-2084 CONTACTOR 24 VAC 4-POLE AB |
| 2500-2393 | Linear 2500-2393 APEX Control Board |
| 2500-791 | Linear 2500-791 Transformer 208/230-24V 40VA |
| 106604 | Linear 106604: Local Antenna |
| 2520-525 | Linear 2520-525 Harness Complete HSLG 1P Apex |
| 2500-214 | Linear 2500-214 TRANSF 480/24V |
| 2500-1980 | Linear OSCO 2500-1980 AC 3Phase Motor Board |
Clutch
| Part number | Part |
|---|---|
| 2100-1008 | Linear 2100-1008 Clutch Shaft |
| 2200-150 | Linear 2200-150 #41 Chain, 20 Links |
| 2400-149-UPS | Linear 2400-149-UPS CHAIN #41 30 LINKS UPS |
| 2200-654 | Linear 2200-654 Limit Shaft Chain (#48 / 30 Links) |
| 2110-274 | Linear 2110-274 SHAFT CLUTCH ASSEMBLY |
| 2400-062 | Linear 2400-062 Jam Nut, 5/8"-18 |
| 2400-061 | Linear 2400-061 Hex Nut, 5/8"-18 |
| 2200-306 | Linear 2200-306 Chain Tension Spring |
| 2100-669-UPS | Linear 2100-669-UPS HUB CLUTCH CAST IR PINNED UPS |
| 2400-273 | Linear 2400-273 Key (3/16" X 1/4") |
| 2100-564 | Linear 2100-564 Clutch Facing |
| 2200-294 | Linear 2200-294 Sprocket 41-A-36 |
| 2200-292-UPS | Linear 2200-292-UPS SPRKT 41-B-12 5/8B OXIDED UPS |
Limit Box
| Part number | Part |
|---|---|
| 2200-030 | Linear 2200-030 Limit Nut |
| 2100-057-UPS | Linear 2100-057-UPS LIMIT SHAFT STANDARD UPS |
| 2500-2347 | Linear 2500-2347 SWITCH LIMIT SPDT OMRON D2VW |
| 2520-173L | Linear 2520-173L Rotary Limit Box Assembly - Switch Lim Assy 2-Sw Lft GSLG |
| 2500-764 | Linear 2500-764 Limit Switch |
Output Shaft
| Part number | Part |
|---|---|
| 2110-131 | Linear 2110-131 Disconnect Block Assembly |
| 2120-132 | Linear 2120-132 Shifter Lever Assembly |
| 2110-236 | Linear 2110-236 SHAFT OUTPUT ASSY HSLG UPS |
| 2100-917-UPS | Linear 2100-917-UPS Output Shaft (1") for HSLG |
Common questions
What maintenance does the three phase HSLG need every six months?
Linear lists a six month check of clutches, belts, chains, limits, brakes, the disconnect, hardware and reversing devices. Clean and lightly oil the drive chain and sprockets at the same time.
How do I adjust the HSLG clutch?
Loosen the jam nut and turn the adjustment nut clockwise one flat (1/6 turn) at a time until the clutch does not slip in normal use. If it still slips when fully adjusted, replace the pads.
How should the brake be set?
The brake disc must run free when the brake is engaged, and the solenoid plunger throw should be between 3/8 in and 1/2 in. A loud buzz from the solenoid means the brake needs adjusting.