Part of the EZ Parts Finder: pick a part on the diagram or use the list below.
Look up Linear SLC slide gate operator parts with this interactive diagram. Clicking a part brings up its part number, and the list below repeats each one by assembly. The views take you from the cover to the main chassis, the back with the motor and belt, the Apex controller, the limit box, both sides, the release and the drive.
Identify your model
The Linear SLC runs a 1/2, 3/4 or 1 HP single phase motor on 115 or 230 VAC, through a 20:1 oil bath gear reducer. The 1/2 and 3/4 HP models use a #41 drive sprocket and the 1 HP model uses a #40 sprocket. Check the horsepower on your operator before ordering sprockets or chain.
Operator and manuals
Most ordered parts
- Linear 2200-030 Limit Nut (2200-030)
- Linear 620-101293 Apex II (620-101293)
- Linear 2500-2311 Motor 1 HP, 115V, 1 Phase (2500-2311)
- Linear 2500-2393 APEX Control Board (2500-2393)
- Linear 2400-501 RING RETAINING RTR CLP VS/GSLG (2400-501)
- Linear 2200-790 Lock and Key Assembly (2200-790)
- Linear 2110-823 Idler Assembly SLC (2110-823)
- Linear 2100-057-UPS LIMIT SHAFT STANDARD UPS (2100-057-UPS)
Parts list by assembly
Cover
| Part number | Part |
|---|---|
| 2500-2240 | Linear 2500-2240 Plunger Reset Button |
| 2200-790 | Linear 2200-790 Lock and Key Assembly |
Main
| Part number | Part |
|---|---|
| 2200-954 | Linear 2200-954 Gear Reducer, 20:1 SLC |
| 2120-477 | Linear 2120-477 Disconnect Handle |
Back
| Part number | Part |
|---|---|
| 2200-962 | Linear 2200-962 V BELT 35 4L STYLE COGGED |
| 2500-2311 | Linear 2500-2311 Motor 1 HP, 115V, 1 Phase |
| 2200-115 | Linear 2200-115 Disconnect Collar Spring |
| 2200-939 | Linear 2200-939 Locking Handle Spring |
| 2100-1983-UPS | Linear 2100-1983-UPS SHAFT DRIVE SLC YDICHR |
| 2200-650 | Linear 2200-650 SPRKT 41-B-24 1B OXIDED |
| 2200-042-PLT | Linear 2200-042-PLT 48-B-15 Sprocket, 1" Bore |
| 2110-823 | Linear 2110-823 Idler Assembly SLC |
Apex
| Part number | Part |
|---|---|
| 620-101293 | Linear 620-101293 Apex II |
| 2500-2393 | Linear 2500-2393 APEX Control Board |
| 106604 | Linear 106604: Local Antenna |
Limit Box
| Part number | Part |
|---|---|
| 2100-057-UPS | Linear 2100-057-UPS LIMIT SHAFT STANDARD UPS |
| 2200-030 | Linear 2200-030 Limit Nut |
| 2200-041 | Linear 2200-041 SPRKT 48-B-15 1/2B 1SS |
| 2200-554 | Linear 2200-554 CHAIN #48 14 LINKS |
Left Side
| Part number | Part |
|---|---|
| 2400-501 | Linear 2400-501 RING RETAINING RTR CLP VS/GSLG |
Common questions
What motors does the Linear SLC use?
Linear lists 1/2, 3/4 or 1 HP single phase instant reversing motors, on 115 or 230 VAC single phase power.
How fast does the SLC open the gate?
Linear rates the SLC at about 11 inches per second.