BEA EAGLE ARTEK Motion Sensor Manuals & Support

The BEA EAGLE ARTEK is a compact 24 GHz microwave motion sensor that opens automatic doors. It replaces the EAGLE.

The field shape is set with push buttons or the BEA remote, with no manual antenna change. It runs on 12 to 24 VAC or VDC and has a solid-state relay output.

Buy the 10EAGLEARTEK

Identify your model

The EAGLE ARTEK is a slim black sensor with an LED window and push-button settings. It replaces the EAGLE.

Key specs

Technology	24.15 GHz microwave, motion
Max field	Wide 13 x 6.5 ft; narrow 6.5 x 7 ft at 7 ft high
Min speed	2 in/s
Power	12 to 24 VAC or VDC, under 1 W
Output	Solid-state relay, 30 VAC / 42 VDC, 100 mA

Manuals and documents

Troubleshooting

Door stays closed, LED off

Check power. Check that door control (F2) is set to 1, automatic.

Door opens and closes over and over

Secure the sensor. Set unidirectional mode. Increase the antenna angle and immunity filter. Reduce the field.

Door opens for no reason

Rain: set unidirectional mode and raise the immunity filter.
Reflective area or the opposite door in a vestibule: change the antenna angle, reduce the field and raise the filter.

LED flashes fast after unlock

The sensor has an access code. Enter it, or cut and restore power to get in without it.

No response to the remote

Check the remote batteries.

Common questions

The EAGLE ARTEK.

It can be set up to meet ANSI A156.10 for automatic pedestrian doors. Follow the user guide and the door manufacturer instructions, and run a daily safety check.

Cut and restore power. The sensor can then be opened without the code. Change or delete the code.