Cartell CP-4 Free Exit System Manuals & Support

Cartell CP4-100 / CP4-200 / CP4-300

The Cartell CP-4 is a hard-wired free exit system. A magnetometer probe buried beside the driveway opens the gate when a vehicle drives out. It wires straight to the operator free exit input.

It reacts only to moving steel, not people or animals, and draws 30 to 70 µA in standby for solar gates. The cable length is 100, 200 or 300 ft.

Buy the CP4-100 / CP4-200 / CP4-300 (2 options)

Identify your model

The number after CP4- is the cable length in feet. The probe housing is conduit-ready and the cable uses standard wire colors.

Key specs

Power 8 to 24 VAC or 8 to 30 VDC
Standby draw 30 to 70 µA
Output SPDT relay, 1 A at 24 VDC
Relay time 2 to 3 seconds
Range High 12 to 14 ft, medium 6 to 8 ft, low 2 to 4 ft
Cable 100, 200 or 300 ft

Manuals and documents

Installation Manual

Troubleshooting

Gate does not open

  • Raise the sensitivity with the DIP switches.
  • Check the probe is 5 to 8 in deep and 80 to 100 ft back from the operator.

False opens

  • Move the probe away from buried power, phone or pet fence lines.

Common questions

No. Install separate entrapment protection on the gate.

Cartell recommends 80 to 100 ft back from the operator, 5 to 8 in deep, with the cable in conduit.

No. It wires straight to the free exit input.