Click2Enter C2E1 Radio Activated Access Manuals & Support

Click2Enter C2E1 / C2E1-RHK

The Click2Enter C2E1 lets emergency responders open gates, barrier arms and doors with two clicks of their radio transmit button. No keys, codes or remotes are needed.

It has 20 channels, receives trunked talk-around and 800 MHz bands and auto-detects private line codes. It has 2 sets of relay contacts and runs on 12 to 24 VDC.

Buy the C2E1 / C2E1-RHK (2 options)

Identify your model

C2E1: standard unit. C2E1-RHK: adds a heater kit for cold weather. Both are in a NEMA 4 fiberglass enclosure.

Key specs

Channels 20
Power 12 to 24 VDC
Outputs 2 sets of relay contacts
Hold open 0 to 60 minute reset per channel
Enclosure NEMA 4 fiberglass
Programming RS-232 with terminal software

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Gate does not open on a radio click

  • Check the channel and private line code programming.
  • Check the antenna and power.

Common questions

The buyer programs it for the local responder radio channels.

Yes, with the digital radio set to clear mode.

Use the C2E1-RHK where winters are cold.