Durant Stat-A-Flex Loop Sealant Manuals & Support

Durant Stat-A-Flex

Durant Stat-A-Flex is a polyester loop sealant cured with MEKP. It gels in 10 to 20 minutes and cures in 45 to 60 minutes.

It is DOT approved for saw-cut loop slots.

Buy the Stat-A-Flex

Identify your model

Polyester resin with an MEKP hardener. Cure times change with air temperature. See the drying guide.

Key specs

Type Polyester with MEKP hardener
Gel time 10 to 20 minutes
Cure time 45 to 60 minutes
Approval DOT approved

Manuals and documents

Spec Sheet

Safety Data Sheet

Other documents

Troubleshooting

Sealant stays soft

  • Check the cure time chart for the air temperature.
  • Check that the mix ratio was right.

Sealant pulls away from the cut

  • Clean and dry the slot before sealing.
  • Blow out dust and water with air first.

Common questions

About 45 to 60 minutes. Cold weather takes longer. Check the drying guide.

MEKP.

Yes.