Identify your model
The IRB-4X has separate hoods. The IRB-4X2 has built-in hoods, removable terminals and a red obstruction LED on the receiver. For monitored UL 325 use, see the IRB-MON2.
Key specs
| Type | Thru-beam, non-monitored |
|---|---|
| Range | Up to 115 ft |
| Power | 12 to 24 VDC or 24 VAC |
| Relay | Form C, 1 A at 24 VDC |
| Response time | 10 ms |
| Operating temperature | -40 to 170 °F |
| UL 325 | Not for applications that require monitored devices |
Manuals and documents
Installation Manual
-
IRB-4X2 Instruction Manual
View PDF: IRB-4X2 Instruction Manual (opens in a new tab) -
IRB-4X Instruction Manual
View PDF: IRB-4X Instruction Manual (opens in a new tab)
Spec Sheet
-
IRB-4X2 Spec Sheet
View PDF: IRB-4X2 Spec Sheet (opens in a new tab) -
IRB-4X Spec Sheet
View PDF: IRB-4X Spec Sheet (opens in a new tab)
Troubleshooting
Common questions
No. It has a dry contact output only. Use a monitored photo eye such as the IRB-MON2 or IRB-RET2 where the operator requires monitored devices.
Reversing or opening inputs on garage doors, rolling doors, parking barriers and older operators that accept a dry contact.
Up to 115 ft.