EMX IRB-RET2 Photo Eye Manuals & Support

EMX IRB-RET2

The EMX IRB-RET2 is a universal UL 325 retroreflective photo eye for gates and doors. One sensor and a reflector protect a span of 5 to 60 ft.

It supports six monitoring methods: normally closed, 10K resistive and 2-wire or 4-wire pulse at two or three frequencies. It has an alignment LED, an integrated hood, a ball and socket bracket and a stealth mode that turns the LEDs off.

Buy the IRB-RET2

Identify your model

The IRB-RET2 is a single housing with a built-in hood, a ball and socket bracket and a 1/2 in conduit entry. It replaces the original IRB-RET.

Key specs

Type Retroreflective, type B1 non-contact sensor
Range 5 to 60 ft
Monitoring NC, 10K, 2-wire pulse (2 or 3 frequency), 4-wire pulse (2 or 3 frequency)
Power 6 to 40 VDC or 12 to 24 VAC
Current 50 mA relay mode; 15 mA pulse mode
Response time 250 ms
Enclosure NEMA 4X
Operating temperature -30 to 140 °F
Conduit 1/2 in NPT

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Set the sensitivity, DIP switches SW1 and SW2 and jumper JP1 before you align it. They are hard to reach once the photo eye is aimed.

LED status

  • Green and red on: aligned, no obstruction (safe).
  • Green on, red flashing: partial alignment. Slow flash is poor, fast flash is close.
  • Green on, red off: beam blocked or not aligned.
  • Green off: no power.

Hard to align or drops out in weather

  • Set the sensitivity dial to the distance: 5 to 20 ft, 20 to 30 ft or 30 to 60 ft.
  • Turn the dial clockwise for more margin in rain, snow or fog.
  • Move the reflector left, right, up and down until the red LED is solid.

LEDs off after 30 seconds

  • Stealth mode is on (SW2 position 2). Block the beam to wake the LEDs.

Common questions

From 5 ft up to 60 ft.

It works with operators that accept a monitored external entrapment device. Check the operator manual for the monitoring method it needs, then set the photo eye to match.

Use the EMX reflector supplied with the IRB-RET2 so the range and safety rating hold.