EMX LRS Loop Replacement System Manuals & Support

EMX LRS-FP-50 / LRS-C1

The EMX LRS is a 3-axis magnetoresistive vehicle detector that replaces an inductive loop. The sensor goes in a single saw cut or mounts above grade.

The LRS-C1 control module programs the sensor and provides the relay output. It has an ULTRAMETER sensitivity display and DETECT-ON-STOP, which only detects vehicles that stop near the sensor.

Buy the LRS-FP-50 / LRS-C1 (3 options)

Identify your model

The LRS-FP is the flat sensor puck on a 50 ft lead. The LRS-C1 is the control module that plugs into the operator. Kits include both.

Key specs

Technology 3-axis magnetoresistive, X, Y and Z selectable
Install Single saw cut or above grade
Controller LRS-C1 with relay output
Features ULTRAMETER display, DETECT-ON-STOP
Sensor lead 50 ft (LRS-FP-50)

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Press RESET on the LRS-C1 every time you change a setting or move the sensor.

False calls

  • Keep the sensor at least 6 ft from all moving metal.
  • Keep it away from power lines, transformers and other electrical equipment.
  • Mount it so it cannot move. Any movement causes a call.

Rebar in the slab

  • Install the sensor above the rebar.

Common questions

No. The LRS sensor replaces the loop and needs a single saw cut, or it can be mounted above grade.

Yes. DETECT-ON-STOP only triggers when a vehicle stops near the sensor.

Press RESET on the LRS-C1 so it relearns the background.