EMX LRS - Loop Replacement System

EMX ITEM:
EMX LRS loop replacement system

EMX LRS - Loop Replacement System

EMX ITEM:
Probe Type
Lead Length
Regular price $275.00
/
  • Current Trade Policy Costs Included In Price
  • In Cart Discounts Offered on Many Products
  • GSA, Net 30 and purchase orders available
Shipping calculated at checkout.

Description

EMX LRS (Loop Replacement System) vehicle presence detector. This listing is the system: LRS-C1 controller plus one LRS sensor. Choose the Sawcut Flat Pack (LRS-FP) or Direct Burial (LRS-DB) sensor, with a 50 ft or 100 ft lead. The sensor uses 3-axis magnetoresistive sensing to detect a vehicle by its effect on the earth's magnetic field, so it replaces a saw-cut loop with a single saw cut or a buried probe. Controller power is 12 to 30 VDC or 24 VAC.

Detection range is about 5 ft from the sensor and it detects ferrous vehicles, not pedestrians. Sensitivity has 10 levels, and the X, Y and Z axes can be selected independently. The sensor tracks the background magnetic field and keeps its settings in non-volatile memory. DETECT-ON-STOP only detects once a vehicle has stopped, typically 1 to 2 seconds, which helps ignore cross traffic. The controller has an SPDT relay rated 1 A at 24 VDC to 120 VAC and an NPN open collector output. It draws 40 mA max. Sensors are IP69K rated. Warranty is 2 years from EMX. LRS replaces the discontinued CarSense 303.

What's Included

  • LRS-C1 controller
  • One LRS sensor: Sawcut Flat Pack or Direct Burial, 50 ft or 100 ft lead (as selected)

Before You Order

  • Power: 12 to 30 VDC or 24 VAC.
  • Flat Pack goes in a single saw cut. Direct Burial goes in the ground and can also be strapped to a wall above grade with plastic conduit straps.
  • The controller wires to 10-position screw terminals. Check your operator for a dry contact or open collector input.
  • Three-dimensional presence detection of vehicles
  • Select X, Y, Z axis independently
  • Stand-alone sensor
  • Sensor stores ambient background and settings in non-volatile memory
  • Remote control module for programming and additional relay contact output
  • ULTRAMETER™ displays optimum sensitivity setting/crosstalk interference
  • DETECT-ON-STOP™ allows detection only when a vehicle has come to a complete stop
  • Optional Logic Interface for extended detection

LRS-C1 Controller

  • Part Number: EMX-2303-2 (LRS-C1)
  • Outputs: SPDT relay / NPN (open collector)
  • Output Current Rating: Relay 1 A @ 24 VDC to 120 VAC; NPN 50 mA (max)
  • Connection: 10 position screw terminal
  • Housing Material: ABS (plastic)
  • Environmental Rating: IP30
  • Power: 12-30 VDC and 24 VAC
  • Current Draw: 40 mA (max)
  • Dimensions (L x W x H): 3.0 x 0.9 x 2.75 in (76 x 22 x 70 mm)
  • Weight: 0.15 lb (68 g)
  • Power/Fault Indicator: Green LED
  • Detect Indicator: Red LED

LRS-FP and LRS-DB Sensor

  • Part Numbers: LRS-FP-50 / LRS-FP-100 (flat pack), LRS-DB-50 / LRS-DB-100 (direct burial); 50 or 100 ft lead
  • Outputs: NPN (open collector)
  • Output Current Rating: 50 mA (max)
  • Connection: 5 conductor direct burial
  • Housing Material: LRS-FP: polyamide; LRS-DB: PVC
  • Environmental Rating: IP69K
  • Power: 12-30 VDC
  • Current Draw: 10 mA (max)
  • Dimensions: LRS-FP: 3.4 x 0.9 x 0.3 in (86 x 21 x 8 mm); LRS-DB: 4.0 x 1.0 in (102 x 27 mm)
  • Weight: LRS-FP: 0.05 lb (23 g); LRS-DB: 0.09 lb (43 g)
  • Detection Range: 5 ft (1.5 m) radius
  • Response Time: 125 ms
  • Operating Environment: -40 to 180°F (-40 to 82°C), 0 to 95% relative humidity
  • Supply Protection: Reverse polarity and fuse protected
  • Fail Safe: Outputs fail safe in the event of a sensor failure or power loss

Control Unit and Sensor

  • Sensing Technology: 3-axis magnetoresistive
  • ULTRAMETER™ Display: 10 levels of sensitivity: 0-9
  • Axis Sensitivity: 512 counts/gauss (typical)
  • Environmental Tracking: Automatic compensation
  • Local Magnetic Field Nulling: Averages local field signature in any sensor orientation
  • Detection Range: 5 ft (1.5 m)
  • Pulse/Presence: Relay/NPN output can send a pulse output or hold constant presence
  • Detect-On-Stop™: Requires vehicle to stop for a minimum of 1 second (1-2 s typical)
  • Operating Environment: -40 to 180°F (-40 to 82°C), 0 to 95% relative humidity
  • Supply Protection Circuitry: Reverse polarity and fuse protected

Control Unit (LRS-C1)

  • Outputs: SPDT relay / NPN (open collector)
  • Output Current Rating: Relay 1 A @ 24 VDC to 120 VAC; NPN 50 mA (max)
  • Connection: 10 position screw terminal
  • Housing Material: ABS (plastic)
  • Environmental Rating: IP30
  • Power: 12-30 VDC and 24 VAC
  • Current Draw: 40 mA (max)
  • Dimensions (L x W x H): 3.0 x 0.9 x 2.75 in (76 x 22 x 70 mm)
  • Weight: 0.15 lb (68 g)
  • Power/Fault Indicator: Green LED
  • Detect Indicator: Red LED

Sensor (LRS-FP / LRS-DB)

  • Outputs: NPN (open collector)
  • Output Current Rating: 50 mA (max)
  • Connection: 5 conductor direct burial
  • Housing Material: LRS-FP: polyamide; LRS-DB: PVC
  • Environmental Rating: IP69K
  • Power: 12-30 VDC
  • Current Draw: 10 mA (max)
  • Dimensions: LRS-FP: 3.4 x 0.9 x 0.3 in (86 x 21 x 8 mm); LRS-DB: 4.0 x 1.0 in (102 x 27 mm)
  • Weight: LRS-FP: 0.05 lb (23 g); LRS-DB: 0.09 lb (43 g)

Used to detect vehicles at gate and door operators without a full saw-cut loop, including stopped vehicles.

  • Gate and door operators without a saw-cut loop
  • Vehicle presence detection (stopped vehicles)
  • Detect-on-stop applications
  • Single saw cut or direct burial installs
  • Replacing failed inductive loops

All in stock orders typically ship the same business days or within 1-2 business days. Cut off for same day shipping is 2:30PM Central Time.

LEADTIME

Items with lead times typically ship in 4-7 business days.

FREE SHIPPING POLICY

Orders with free shipping may have longer lead times due to those items being shipped the most economical way. Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items

Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.

Read return policies

Protec Controls accepts purchase orders please contact us.

NET 30

We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.

GOVERNMENT & GSA

Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com

Recommended Accessories


You may also like

Reviews