Linear Delta-3 Receivers Manuals & Support

Linear GRD / DR / DRA / DR-4 / DRA-4

Linear Delta-3 receivers work with Delta-3 transmitters and keypads on 310 MHz. The code is set on an 8-position DIP switch, 256 codes.

Pick the receiver by channels and power. Any number of Delta-3 transmitters can run one receiver.

Buy the GRD / DR / DRA / DR-4 / DRA-4 (6 options)

Identify your model

GRD (DNR00101): 1-channel gate receiver, 12 to 30 V. DR: 1-channel, 24 V. DRA: 1-channel, 12 V. DR-4 and DRA-4: 4-channel. DR-2: 2-channel, archived. DRM: built-in receiver. DTKP: Delta-3 wireless keypad.

Key specs

Radio Delta-3, 310 MHz
Codes 256, DIP switch
GRD power 12 to 30 VAC or 10.5 to 30 VDC
GRD relay Form A, 5 A
GRD antenna F connector, remote mount kit

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Remote does not work

  • Check the battery and the LED on the remote.
  • Program the remote to the receiver again.
  • Check that the remote and the receiver use the same radio type.

Short range

  • Move the antenna away from metal and mount it high.
  • Check for a weak battery.

Common questions

No. Delta-3 receivers need Delta-3 transmitters.

Set the DIP switches to the same code as the transmitter.

Yes, the DTKP wireless keypad.