Linear WOR Wiegand Output Receiver Manuals & Support

Linear WOR (ACP00727)

The Linear WOR is a radio reader that lets any Wiegand access control panel accept MegaCode transmitters. Transmitters are added like cards with no software changes.

It outputs 26, 30 or 31-bit Wiegand data, has a field adjustable read range from 5 to 500 ft and a weather-resistant case for indoor or outdoor mounting.

Buy the WOR (ACP00727)

Identify your model

The WOR is a small receiver that wires to the card reader input of an access panel. Use MegaCode transmitters such as the MDT series.

Key specs

Output Wiegand 26, 30 or 31 bit
Input MegaCode transmitters
Read range 5 to 500 ft, adjustable
Codes Facility and ID codes set to the system
Housing Weather resistant

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Panel does not see a transmitter

  • Check the Wiegand format matches the panel: 26, 30 or 31 bit.
  • Enroll the transmitter in the panel like a new card.

Range too long or short

  • Adjust the read range so only nearby vehicles trigger it.

Common questions

It works with panels that accept Wiegand 26, 30 or 31-bit card readers.

The read range is adjustable from 5 to 500 ft.

Linear MegaCode transmitters such as the MDT series.