Miller Edge MLC and RLC Light Curtains Manuals & Support

Miller Edge MLC-K36 / MLC-K72 / RLC-K36

This model is discontinued. Manuals and replacement parts for existing units are listed below.

The Miller Edge MLC and RLC are infrared light curtains for commercial doors. They protect the opening above the floor better than a single-beam photo eye.

The MLC is monitored and meets UL 325. The RLC is a relay version. K36 kits are 3 ft with 8 elements and K72 kits are 6 ft with 16 elements. Miller Edge has replaced the MLC with the MLC-DUO.

Buy the MLC-K36 / MLC-K72 / RLC-K36 (4 options)

Identify your model

Each kit has an emitter (2 wires) and a receiver (4 wires). The model is on the label: MLC is monitored, RLC is relay output. RLC-K72: 72 in relay output light curtain.

Key specs

MLC-K36 / RLC-K36 3 ft, 8 elements
MLC-K72 / RLC-K72 6 ft, 16 elements
MLC Monitored, UL 325 recognized
RLC Relay output
Mounting Brackets about 6 in from each end; center bracket on K72

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Door will not close

  • Check the emitter and receiver face each other and no part of the door blocks the beams.
  • Check the wiring: emitter 2 wires, receiver 4 wires.

Mounting

  • Mount near the door tracks inside the opening, with brackets about 6 in from the top and bottom of each bar.

Common questions

The MLC is monitored and meets UL 325 for operators that require monitored devices. The RLC has a relay output for operators that accept a dry contact.

Miller Edge lists the MLC-K36-DUO and MLC-K72-DUO as replacements.

K36 covers 3 ft of height and K72 covers 6 ft.