Seco-Larm SH-816S-SMQ 4-in-1 Siren/Strobe Manuals & Support

Seco-Larm SH-816S-SMQ

The Seco-Larm SH-816S-SMQ is a 4-in-1 outdoor device: 115 dB siren, LED strobe, custom message player and PA speaker. It runs on 9 to 15 VDC and is rated IP65.

Load your own MP3 or WAV message (up to 2 MB) through the micro-USB port. Input 1 sounds the siren and input 2 plays the message and overrides input 1. The SH-816S-BMQ is the version without the strobe.

Buy the SH-816S-SMQ (5 options)

Identify your model

SH-816S-SMQ/x has a strobe lens: /A amber, /B blue, /C clear, /R red. The SH-816S-BMQ is the white 3-in-1 version with no strobe. Both have a micro-USB port inside for the message file. The siren-only model is the SH-816S.

Key specs

Siren 115 dB
Speaker 20 W peak, PA input up to 2 V
Message MP3 or WAV, up to 2 MB, micro-USB upload
Operating voltage 9 to 15 VDC
Current draw at 12 VDC Siren 1 A; strobe 50 mA; both 1.05 A
Alarm inputs 2, ground trigger
Tamper output 100 mA at 30 VAC/VDC
IP rating IP65

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Message does not play

  • Check the file is MP3 or WAV and no larger than 2 MB.
  • Input 2 plays the message. Check that input 2 is pulled to ground.

PA audio is distorted

  • Keep the PA input at or below 2 V.

No siren

  • Input 1 triggers the siren. Check that input 1 is pulled to ground and input 2 is not active.

Common questions

Connect a computer to the micro-USB port and copy an MP3 or WAV file up to 2 MB.

Input 2, the custom message, overrides input 1, the siren.

Yes. Feed a line-level signal no higher than 2 V to the PA input.