Seco-Larm SH-816S Self-Contained Siren and Siren/Strobe Manuals & Support

Seco-Larm SH-816S-BQ / SH-816S-SQ

The Seco-Larm SH-816S-SQ is an outdoor siren with an LED strobe, and the SH-816S-BQ is the siren only. Both give a 120 dB warble tone on 9 to 15 VDC and are rated IP65.

A 25 W speaker input lets them play audio or broadcast messages, which override the siren. The strobe can be triggered apart from the siren, and a tamper output is built in.

Buy the SH-816S-BQ / SH-816S-SQ (5 options)

Identify your model

SH-816S-SQ/x has a strobe lens: /A amber, /B blue, /C clear, /R red. SH-816S-BQ has no strobe. The SH-816S-SLQ is the replacement lens. The 4-in-1 message model is the SH-816S-SMQ.

Key specs

Siren 120 dB warble tone
Speaker 25 W peak, audio input
Operating voltage 9 to 15 VDC
Current draw at 12 VDC Siren 680 mA; strobe 190 mA; both 870 mA
Strobe 100 flashes per minute (SQ only)
Tamper output 100 mA at 30 VAC/VDC
IP rating IP65
Operating temperature -4 to 131 °F

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

No siren

  • Check 9 to 15 VDC on the siren terminals during alarm.
  • An active audio input overrides the siren. Remove the audio signal to test.

No strobe

  • The strobe has its own terminal. Check that it is wired to an output that turns on.

Tamper alarm

  • Check that the cover is fully seated on the base.

Common questions

Yes. Connect an audio source to the speaker input. The broadcast overrides the siren while it plays.

Yes. The strobe has its own trigger terminal.

Amber, blue, clear and red. Replacement lenses are the SH-816S-SLQ series.