Seco-Larm SK-1322-SPQ Weatherproof Keypad with Prox Manuals & Support

Seco-Larm SK-1322-SPQ

The Seco-Larm SK-1322-SPQ is a weatherproof stand-alone keypad with a 125 kHz prox reader in an IP65 plastic housing. It holds 1,010 users and runs on 12 to 24 VAC/VDC.

Two Form C relays are rated 1 A at 30 VDC, timed 1 to 99 seconds or toggle. Output 2 can run a doorbell. It has two egress inputs, a door sensor input and an optical tamper sensor.

Buy the SK-1322-SPQ

Identify your model

The SK-1322-SPQ is 2-15/16 x 4-1/2 x 7/8 in with backlit keys and mounts on a single-gang box. The metal-housing versions are the SK-1323.

Key specs

Users 1,010
Operating voltage 12 to 24 VAC/VDC
Relays 2, Form C, 1 A at 30 VDC
Output time 1 to 99 seconds or toggle
Read range 2 in
Inputs 2 egress, door sensor
IP rating IP65
Operating temperature -4 to 122 °F

Manuals and documents

Installation Manual

Spec Sheet

Troubleshooting

Lock does not release on a good code

  • Check that the lock wire is on the correct relay terminal: N.O. for fail-secure, N.C. for fail-safe.
  • Install the diode across a DC lock or a varistor across an AC lock, unless the lock has its own protection.

Keypad is dead

  • Check the supply voltage at the power leads.

Common questions

125 kHz EM prox credentials, such as PR-K1S1-A cards and PR-K1K1-AQ key fobs. They are sold separately.

Yes. Output 2 can be set to drive a doorbell.

Yes. Change the factory master code during setup and record the new one.